#52 SR400Custom Report
We received an order from a beginner owner, and created a Street SR entirely with bolt-on parts.
We have kept it to a standard light custom before deciding on the future direction, but it is well put together with a good atmosphere.
“Check out other 2%ER street bobber custom samples here”
◎『Check out other 2%ER’s unmodified frame custom SR400/500 here』
Custom List
FrontHandlebars, F forks, headlights, etc.
【Front Fender】
〇Genuine front fender with black plating.
“SR400/500 Front fender upper stay“
〇A plate to lift and attach the fender when using tires with height (height).
【Front Tire】
〇A classic watermelon pattern, high vintage style tire.
【Headlight】
“5.75 inch Bates Light Black General Purpose“
〇A classic headlight that matches well with the SR’s vehicle size and fork width. It is installed with a headlight stay that mounts low and close to the vehicle body.
【Handle/Handle Area】
“Amal type throttle holder, general purpose (for 7/8″)“
“Amal type slot wire 1100mm ’88~’08“
The handle is a standard pullback. We use long cables for the simple throttle.
“MOTOR ROCK Decompression lever“
A decompression lever directly attached to the engine to simplify the area around the handle. (The one on the vehicle is an old model)
【Front Blinker】
“Small Bullet Turn Signal Matte Black 4pcs SET General Purpose“
〇A classic among classics. A chopper-style blinker.
“SR400/500 Stem Mount Winker Stay B Type“
〇A high-quality stainless stay to mount a 10mm blinker on the stem side.
【Speedometer】
“Mechanical Speedometer 60mm Black Panel 1:4“
〇A standard small meter. It comes with a trip meter.
CenterTank, oil tank, seat, step, muffler etc.
•Paint the gasoline tank in solid black. Once the preference is decided, we plan to add additional paint, lettering, and pinstripes.
【Muffler】
〇A classical trumpet muffler that is slip-on mounted on a normal exhaust pipe. It is a high-quality stainless muffler made in Japan, with a focus on sound quality.
【Step】
“Mid-High Control Parkerized for SR400/500“
〇This step kit is essential for 2%ER’s custom, which makes your riding posture cool and extremely less tiring.
【Seat】
〇It’s a standard seat for 2%ER’s normal frame custom, with features that are hard to express in mass-produced items, such as button-down, thick urethane that still looks stylish, etc.
【Electrical Equipment】
〇A simple electrical plate that makes it easy to organize harnesses and electrical components.
“IC blinker relay wide range specification“
〇A wide-range blinker relay that can handle 1-150 watts without any difficulty, even for LED blinkers. It can also be used as a replacement for the original relay.
〇A battery-less kit that is manufactured entirely in Japan.
【Engine Area】
〇This is a filter kit needed when removing the original air cleaner.
【Drive System】
“Front sprocket SR400/500 428-19“
〇A durable replacement sprocket made of steel.
RearFenders, rear shocks, swingarms, etc.
【Rear Shock】
〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions. (Removal of the original chain case is necessary)
【Rear Tire】
〇A classic vintage style watermelon pattern. It’s a rear tire with height and volume.
【Rear Fender】
〇Genuine fender with black plating process.
【Tail Lamp】
〇A classic simple Sparto tail lamp. It is in black.
【Rear Blinker】
〇A classic among classics. A chopper-style blinker.
【Drive System】
“Rear sprocket SR400/500 428-56“
〇A durable sprocket made of steel.
〇A replacement drive chain with built-in O-rings.
※Parts Reference may show similar products or products with additional processing.