FrontHandlebars, F forks, headlights, etc.

【Front Fork】

『2%er 10cm long Joints for Front Fork (pair) [SR400/500]』　　　

〇A front fork extended by 10cm. The fork bottom case is finished with smoothing & polish.

---

【Headlight】

◯ The headlight is a deadstock “Dixie Rectangle”.

Similar products are here↓

“Vintage Style Square Headlight General Purpose“

【Front Wheel】

“SHINKO flute 3.00-18”

〇 A street tire with a vertical groove design. It corrects the handling that tends to become heavy when long forks are used. It is a small diameter size with a round 3.00 size.

---

【Handle/Handle Area】

“Narrow Drag Bar Handle”

〇A narrow flat handle with a short clamp section.

“One-Piece Handlebar Top Clamp“

“Amal type throttle holder, general purpose (for 7/8″)“

“Chopper Grip Black 22.2mm 7/8inch“

“Amal type slot wire 900mm ’88~’08“

“Brake Wire 200mm Long“

“Clutch wire/300mm 200mm 100mm standard SR400/500 ALL YEARS“

◯We are using each cable for the simple throttle.

---

“Chrome British Car Type Clutch Lever“

“Chrome British Car Type Brake Lever“

◯The controls are finished in a simple British style with mini switches and the like.

---

“Handle Lock Weld On Kit“

〇We have newly installed a handle lock under the stem, which is inconspicuous and easy to operate.

---

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the area around the handle. (The one on the vehicle is an old model)

---

【Front Blinker】

“Diamond Winker Chrome 4pcs SET General Purpose“

“Diamond Blinker Stay“

◯The blinker is attached to the bottom of the frame.

---

【Speedometer】

“Mechanical Speedometer 60mm Black Panel 1:4“

“Universal Speedometer Stay“

〇Mounted on the left front side of the gasoline tank where it is inconspicuous and highly visible.

“Extension meter cable joint“

〇Used when extending the fork or relocating the meter.

CenterTank, oil tank, seat, step, muffler etc.

【Muffler】

“Exhaust Pipe Flange Set for Custom Pipe Production”

“Fishtail End Tip“

〇A custom-made one-off using a convenient production kit for the base mouthpiece. Upswept muffler with a fishtail.

---

【Seat/Seat Rail】

◯Seat rail drop processing for universal solo seat vertical.

---

【Electrical Equipment】

“IC blinker relay wide range specification“

〇A wide-range turn signal relay that can be used without difficulty even with LED turn signals, supporting 1-150 watts. It can also be used as a replacement for the original relay.

“Battery Lesser“

〇This is a battery-less kit that is made entirely in Japan.

“Custom Ignition Switch Weld On Kit General Purpose“

〇Easy to operate even while riding, it is welded and installed under the left side of the seat.

---

【Gas Tank Installation】

◯ The gas tank is a narrow Mustang with a three-point rubber mount.

“Welding nut non-through M8 2p“

〇 Drill a hole in the gas tank body and insert it for welding. It’s non-penetrating, so it won’t leak. Used on both sides.

“Weld tab M size 4.5mm thickness 2p“

〇 Enlarge the hole diameter and change to a rubber mount specification to hold the non-penetrating nut. Used on both sides.

“Weld tab L size 4.5mm thick steel 2p“

〇 Used for the rear installation of the gas tank. This also has an enlarged hole diameter and is used with a rubber mount.

---

【Engine Area】

“Breather filter SR400/500“

〇A filter kit needed when removing the original air cleaner.

---

【Drive System】

“Front sprocket SR400/500 428-19“

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

【Rear Shock】

“280mm G-Suspension/Chrome”

〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions.

---

【Tail Lamp】

“Lucas tail lamp with pedestal Japanese standard number size“

◯A tail lamp that is easy to use with a Japanese standard number size, while having the nice atmosphere of an imported body.

---

【Rear Blinker】

“Diamond Winker Chrome 4pcs SET General Purpose“

---

【Drive System】

“Rear sprocket SR400/500 428-56“

〇A cost-effective and durable replacement sprocket.

“O-ring chain 428-130L“

〇A replacement drive chain with built-in O-rings.