FrontHandlebars, F forks, headlights, etc.

【Front Fender】

“2%er Short Front Fender STD [SR400/500]“

〇A short fender that suits any style. Despite being made of FRP, it has a design with ribs around the perimeter like the original.

【Front Wheel】

“2%er Front Wheel Aluminum Hub Cap [SR400/500]“

〇You can change to a classical style by sticking it on a normal drum brake. The tire is a white wall selected by the owner.

【Headlight】

“5.75 inch Bates Light Black Body/Chrome Rim”

“SR Bottom Mount Light Stay“

〇A classic headlight that matches well with the SR’s vehicle size and fork width. It is installed with a headlight stay that mounts low and close to the vehicle body.

【Handle/Handle Area】

“2%er 70’s Pull-back Handle“

“Amal type throttle holder, general purpose (for 7/8″)“

“Amal type slot wire 1100mm ’88~’08“

“300mm Long Brake Cable“

“200mm Long Clutch Cable“

〇The handle is a standard pullback. We use long cables for the simple throttle.

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇A mini turn signal switch that is easy to install with a coupler on

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the area around the handle. (The one on the vehicle is an old model)

【Front Blinker】

“Small Bullet Turn Signal Matte Black 4pcs SET General Purpose“

〇A classic among classics. A chopper-style blinker.

“SR400/500 Bottom Mount narrow blinker stay“

〇A stay to attach a 10mm blinker to the frame bottom.

【Speedometer】

“Mechanical speedometer φ48mm [No trip 1:4] General purpose #General-purpose parts“

CenterTank, oil tank, seat, step, muffler etc.

•The gas tank is the standard “Black Paint Normal Tank”.

【Muffler】

『Slip-On Megaphone Muffler for SR400/500』

〇A reverse cone muffler that is slip-on mounted on a normal exhaust pipe. It is one of the most prominent deep bass sounds among the numerous aftermarket mufflers.

【Seat】

“Old School Double Seat II SR400/500“

〇It’s a standard seat for 2%ER’s normal frame custom, with features that are difficult to express in mass-produced items, such as button-down, thick urethane that still looks stylish.

【Electrical Equipment】

“Brat Style Electrical Plate“

〇A simple electrical plate that makes it easy to organize harnesses and electrical components.

“IC blinker relay wide range specification“

〇A wide-range blinker relay that can handle 1-150 watts without any problem, even for LED blinkers. It can also be used as a replacement for the original relay.

“Battery Lesser“

〇A battery-less kit that is manufactured entirely in Japan.

【Engine Area】

“Breather filter SR400/500“

〇This is a filter kit needed when removing the original air cleaner.

【Drive System】

“Front sprocket SR400/500 428-19“

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

【Rear Shock】

◯ The standard setting of the G-Suspension complete. This time, we have adopted the rear shock of your choice at the same price.

“280mm G-Suspension/Chrome”

【Rear Tire】

◯The tire is a white wall, as specified by the owner, just like the front.

【Rear Fender】

『2%er Rear STD Short Fender [SR400/500]』

〇A short fender with ribs around the perimeter like the original, which suits all designs without fail.

【Tail Lamp】

“Lucas tail lamp with pedestal Japanese standard number size“

◯A tail lamp that is easy to use with a Japanese standard number size, while having the nice atmosphere of an imported body.

【Rear Blinker】

“Small Bullet Turn Signal Matte Black 4pcs SET General Purpose“

〇A classic among classics. A chopper-style blinker.

【Drive System】

“Rear sprocket SR400/500 428-56“

〇A durable sprocket made of steel.

“O-ring chain 428-130L“

〇A replacement drive chain with built-in O-rings.