Home » #80 SR400

#80 SR400

2015.2.18

Custom Bike

#80 SR400Custom Report

The order was to make it like a “toy”.

It’s 2%ER’s specialty, the chop cafe style.

Although it has a low silhouette, the position is carefully set so that the owner, who travels a considerable distance, can ride comfortably.

Although it has a low separate handle, the drop processing of the seat rail has the same effect as raising the handle. Because the weight is not on your hands, you will not get tired easily.

The seat cowl serves as a weight stopper. You can put your weight downward and backward, which allows you to move your body during the ride and disperse fatigue. The front and rear positions of the seat cowl are adjusted to the owner’s physique.

In addition, by adopting the Mid-High Control Parkerized for SR400/500, you can distribute the weight to your feet, and it is possible to ride with your elbow (you can move the weight of your upper body easily) on your knee.

[Overall Silhouette]

It is composed of seat rail drop and low down rear shock.

The wheels are normal size front and rear.

Cookie consent is required to display this video.

Cookie Settings

Custom List

FrontHandlebars, F forks, headlights, etc.

【Front Fork】

◯One-off stainless steel fork cover.

【Front Wheel】

“H-shape aluminum rim SR Front, one size up“

◯The H-type rim has an excellent atmosphere. The hub is finished in a buff finish.

【Headlight】

“Sportster Type Headlight Kit ~`02 Bolt-On Black Body/Chrome Visor”

〇A headlight with a visor and a bright H4 bulb. It’s a convenient headlight that can store a lot of wiring in the body.

【Handle/Handle Area】

“CHUCK BOX Ace Bar Handle”

〇A handmade separate handle that is extremely simple and made of thick stainless steel.

“2%er Top Bridge Ⅰ for separate handle [SR400/500]“

〇A classic style top bridge without a hole for the bar handle. Unnecessary stays are cut, and it is finished with smoothing and buffing.

“Amal type throttle holder, general purpose (for 7/8″)“

〇A very simple, classic vintage style throttle.

“Amal type slot wire 800mm ’88~’08“

“Brake wire/100mm 200mm 300mm 600mm SR400/500 #SR400/500“

“Clutch wire/300mm 200mm 100mm standard SR400/500 ALL YEARS“

【Lever】

“Chrome British Car Type Clutch Lever“

“Chrome British Car Type Brake Lever“

◯Controls are simplified with mini switches and the like.

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇Easy to install mini turn signal switch with coupler on

“Handle Lock Weld On Kit“

〇We have newly installed a handle lock under the stem, which is inconspicuous and easy to operate.

“MOTOR ROCK Decompression lever“

A decompression lever directly attached to the engine to simplify the area around the handle. (The one on the vehicle is an old model)

【Speedometer】

“Mechanical Speedometer 60mm Black Panel 1:4“

“Universal Speedometer Stay“

〇Mounted on the left front side of the gasoline tank, where it is inconspicuous and highly visible.

CenterTank, oil tank, seat, step, muffler etc.

【Muffler】

“Exhaust Pipe Flange Set for One-off Pipe Production”

〇A one-off made using a convenient production kit for the root mouthpiece. The silencer is a one-off Flash Gordon.

【Step】

『Mid-High Control Parkerized for SR400/500』

〇This step kit is essential for the 2%ER custom, which offers a cool riding posture and a position that is extremely less tiring. The step bar has been changed to an Anderson replica.

【Seat】

◯The seat is one-off.

“General Purpose Rib Sheet Cowl FRP 2%er Original“

◯It acts as a stopper for the upper body weight. By holding up to the hip bone, you can ride more comfortably than you imagine.

◯When using separate handlebars, the seat rail drop processing significantly disperses the weight on the hands. This vehicle is designed to drop straight down without bending the newly installed pipe, according to the owner’s physique.

【Carburetor】

“FCR carburetor 39φ, anodized aluminum specification SR400/500, single unit“

◯ A carburetor that is easy to handle with sharp and smooth acceleration. It is finished in a black anodized specification that provides a sharp contrast to the color scheme of the vehicle body.

“Manifold Kit for FCR39φ”

〇 It is a dedicated adapter to firmly fix the FCR carburetor to the SR400/500.

“Funnel Net for FCR Carburetor”

〇 It is a net to avoid debris that could cause major damage to the engine while maintaining smooth air intake resistance.

【Gasoline Tank Installation】

◯The gas tank is one-off. It’s a Sportster type with a low profile, but we’ve added a notch to the side panel for accent.

“Welding nut non-through M8 2p“

〇Drill a hole in the gasoline tank body and insert and weld. It’s non-penetrating, so it won’t leak. Used on both sides.

“Weld tab M size 4.5mm thickness 2p“

〇Enlarge the hole diameter and change to a rubber mount specification to hold the non-penetrating nut. Used on both sides.

“Weld tab L size 4.5mm thick steel 2p“

〇Used for the rear installation of the gas tank. This also has an enlarged hole diameter and is used with a rubber mount.

【Electrical Equipment】

“IC blinker relay wide range specification“

〇A wide-range blinker relay that can handle 1-150 watts without any problem, even for LED blinkers. It can also be used as a replacement for the original relay.

“Battery Lesser“

〇This is a battery-less kit that is made entirely in Japan.

“Custom Ignition Switch Weld On Kit General Purpose“

〇The main key, which is originally on the top bridge, is easy to operate even while riding, and is welded and installed on the lower left of the seat.

【Kick Pedal】

“Brass Kick Pedal“

◯In order to avoid the one-off exhaust pipe that runs along the side of the engine, the kick arm is bent. The burn marks are intentionally left as is. (We accept surface treatments such as re-plating.)

【Engine Area】

“Breather filter SR400/500“

〇This is a filter kit needed when removing the original air cleaner.

【Drive System】

“Front sprocket SR400/500 428-19“

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

【Rear Wheel】

“H aluminum rim SR rear, one size up“

◯ The H-type aluminum rim is mounted on the rear hub, which has been drilled and painted black. This greatly improves the atmosphere and adds to the rigidity of the undercarriage, as well as the finish of the exterior. The wheel hub is sandblasted on the inside and buff polished along with the brake panel.

【Rear Shock】

◯A covered type rear shock. It’s 280mm in size. The side number stay that looks like it’s wrapped around the rear shock is one-off.

【Tail Lamp】

◯The tail is a DUO tail of an American car. We embedded a blue dot.

【Drive System】

“Rear sprocket SR400/500 428-56“