Home » #280 SR400

#280 SR400

2023.6.30

Custom Bike

#280 SR400Custom Report

Order from Ishikawa Prefecture. This is an SR400 chopper style finished with a normal frame without processing. In addition to the standard original bolt-on parts such as a 30cm extended front fork, headlight, handle, seat, etc., we have assembled it well balanced with new products such as “Sportster Tank Kit”, “Long Drag Pipe Muffler Tail Up”, “Hole Type Sissy Bar Kit “FORK”, “Left Side Meter Kit”.

The paint on the gas tank is aging paint by “BACON“.

◎『Check out other 2%ER’s custom SR400/500 without frame modifications here』

Custom List

FrontHandlebars, F forks, headlights, etc.

●The front area is assembled with classic parts such as a front fork extended by 30cm in true Chopper style, a headlight that balances brightness that passes vehicle inspection with styling, and a pullback handle.

【Around the Front Fork】

“2%er 15cm long Joints for Front Fork (pair) [SR400/500]“

〇High-quality stainless steel fork joint.

“SR400/500 15cm long inner tube kit“

〇A fork tube kit that allows you to extend the front more safely.

“2%er Tweak Bar (front stabilizer) [SR 400/500]“

〇A stabilizer that is extremely effective in correcting the handling that tends to lag one beat behind the extended fork.

“Front Fork Dust Seal”

〇A very simple dust seal. It can also be used as a replacement for the original fork boots that become unusable when the fork is extended.

“Welding Side Stand Extension Plate”

〇A plate for extending the side stand that leans too much when the fork is extended. Welding is required.

【Handle/Handle Area】

“2%er 70’s Pull-back Handle“

“Amal type throttle holder, general purpose (for 7/8″)“

“Amal type slot wire 1100mm ’88~’08“

“Barrel Grip”

“600mm Long Brake Cable”

“300mm Long Clutch Cable”

The handle is a standard pullback. We use simple throttles and various long cables.

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇Easy to install mini turn signal switch with coupler on

(Modified installation for different model years and small headlights)

“MOTOR ROCK Decompression lever“

〇 A decompression lever directly attached to the engine to simplify the handle area. (The one on the vehicle is an old model)

【Headlight】

“5.75 inch Bates Light Chrome General Purpose“

〇A headlight that fits well with the SR’s vehicle size and fork width, and can be installed without any discomfort.

“Bottom Mount Light Stay II“

〇A headlight stay that fits well with the chopper style due to its moderate height and protrusion. (5.75 inch Bates Light Set II SR400/SR500)

【Speedometer】

【Small Tank Left Side Meter Kit】

〇When replacing with a small tank such as a sports tank, this is a kit that allows you to bolt on a 60φ meter in a place that is easy to see and not noticeable.

『Extension meter cable joint』

〇Used when extending the fork or relocating the meter.

【Front Blinker】

『Small Bullet Turn Signal Chrome 4pcs SET General Purpose』

〇A classic among classics. A chopper-style blinker.

『SR400/500 Bottom Mount narrow blinker stay』

〇A stay to attach a 10mm blinker to the bottom of the frame.

CenterTank, oil tank, seat, step, muffler etc.

● With the mid-high position step that allows you to ride comfortably and easily, and the old-school double seat with good cushioning, you can enjoy comfortable riding even over long distances. We have incorporated many of the 2%ER’s commitments, such as the direction of front and back, the way it overlaps with the frame, the safe 3-point rubber mount, capacity, ease of assembly, ease of maintenance, etc., into our new Sportster tank. We have also incorporated new items such as the Drag Pipe Long, which we have been particular about how it lines up with and approaches the vehicle body, while maintaining the overall balance.

【Gasoline Tank】

“Sportster Type Gasoline Tank Kit” (Scheduled for release in late 2023)

〇A Sportster tank (capacity about 6 liters) that can be bolted on with a 3-point rubber mount in the best position that 2%ER is particular about.

The paint is by “BACON“.

【Muffler】

“Torque Cone Long Drag Pipe Muffler Tail Up”

〇A long version of the classic drag pipe muffler. It’s a muffler with the best line that suits both normal frames and hardtail frames.

【Step】

“Drilled Mid-High Step Kit/Chrome”

〇The standard mid-high step with a drilled plate. The coolness of your riding posture and the reduction of fatigue will be significantly improved.

【Seat】

“Old School Double Seat”

〇This is a standard seat for 2%ER’s normal frame custom, with features such as a button-down design that is difficult to express in mass-produced items, and a thick urethane design that still looks stylish.

【Electrical Equipment】

“Brat Style Electrical Plate“

〇A simple electrical plate that makes it easy to organize harnesses and electrical components.

“IC blinker relay wide range specification“

〇A wide-range blinker relay that can handle 1-150 watts and can be used without difficulty with LED blinkers. It can also be used as a replacement for the original relay.

“Battery Lesser“

〇A battery-less kit made in Japan.

【Engine Area】

“Breather filter SR400/500“

〇A filter kit needed when removing the original air cleaner.

【Drive System】

“Front sprocket SR400/500 428-19“

〇A durable replacement sprocket made of steel.

RearFenders, rear shocks, swingarms, etc.

●With a rear shock that lowers the height by about 4cm, it improves footing and changes to a silhouette typical of a chopper. The new “Hole Type Sissy Bar Bolt-On Kit FORK” is a set of a bar body with a fork design often seen in old school choppers and a hole type plate, not only improving styling but also functioning as a part that can carry a lot of luggage. We deliberately set the classic Lucas tail on the original rear fender.

【Sissy Bar】

“FROK Sissy Bar Bolt-On Kit”