Follow 2%er
Home » #304 SR400

#304 SR400

Custom Bike

#304 SR400Custom Report

A long fork style SR400 assembled with all bolt-on parts.

With a new old-school chopper standard design, such as a round plate sissy bar,

Built from the experience of producing many full custom SRs, with original bolt-on design parts

.Coolness with an orthodox yet well-balanced overall balance

.The ability to return to the original at any time with all bolt-on production

.Finished in a reasonable price range compared to full custom vehicles from the frame

.Operability such as step position and handling weight that is not easily tired even over long distances

We have carefully crafted it with such commitment.

The bolt-on chopper custom is a big point that it can clear the vehicle inspection much easier compared to the frame modified vehicle.

 

◎”Click here for other 2%ER’s custom SR400/500 without frame modification“

■About Vehicle Inspection

.Muffler replacement or core stuffing

.Adding a left mirror

.Tail lamp replacement or covering with a large lens

.Adding a reflector

With the above, you can clear the vehicle inspection. (※Since it is registered for one person, tandem belt and tandem step are not necessary)

◎『Check out other 2%ER’s custom SR400/500 without frame modifications here』

 

Custom List

FrontHandlebars, F forks, headlights, etc.

●Despite being a 30cm extended long fork, the selection of small-diameter tires with roundness provides a light handling around the front that you wouldn’t expect from a long fork.

The smallest HS type headlight, which can store a lot of harnesses and couplers, significantly reduces the time-consuming harness processing work and organizes the wiring.

【Front Fork Area】

“2%er 15cm long Joints for Front Fork (pair) [SR400/500]“

〇High-quality stainless steel fork joint.

“SR400/500 15cm long inner tube kit“

〇A fork tube kit that allows you to extend the front more safely.

“2%er Tweak Bar (front stabilizer) [SR 400/500]“

〇A stabilizer that is extremely effective in correcting the handling that tends to lag one beat behind with the extended fork.

“Front Fork Dust Seal”

〇A very simple dust seal. It can also be used as a replacement for the original fork boots that become unusable when the fork is lengthened.

“Welding Side Stand Extension Plate”

〇A plate for extending the side stand that leans too much when the fork is extended. Welding is required.

【Headlight】

“5.75 inch Bates Light HS Type Chrome Rim/Black Body”

〇This is a Bates light for custom vehicles, with a harness storage type that can store many harnesses and couplers inside the light.

“Bottom Mount Light Stay II“

〇A headlight stay that suits the chopper style well with its moderate height and protrusion. (5.75 inch Bates Light Set II SR400/SR500)

【Front Wheel】

“2%er Short Front Fender STD [SR400/500]“

〇A short fender that suits any style. It is made of FRP, but it has a design with ribs around the perimeter like the original.

“SHINKO flute 3.00-18”

〇A street tire with a vertical groove design. It helps to lighten the handling that tends to become heavy when the fork is lengthened. It is a small diameter size with a roundness of 3.00.

【Handle/Handle Area】

“Six Bend Handle 7/8 Inch”

◯22.2mm, Six Bend Handle for domestic vehicles.

“PAUGHCO type 3inch Square Riser SR400/500“

〇Maintaining the atmosphere of the time, a very easy-to-use height handle post.

“Barrel Grip”

“Amal type throttle holder, general purpose (for 7/8″)“

“Throttle Wire 1200mm”

“600mm Long Brake Wire”

“300mm Long Clutch Cable”

【Around the Handle】

“Mini Turn Signal Switch Coupler On Kit (’85~00)”

〇A mini turn signal switch that is easy to install with a coupler on

(Different model years, installed with modifications on small headlights)

(※The harness is extended for installation)

“MOTOR ROCK Decompression lever“

〇A decompression lever directly attached to the engine to simplify the area around the handle.

【Front Blinker】

“Small Bullet Blinker/Chrome”

〇A classic small bullet blinker. It is a 10mm mount.

“SR400/500 Stem Mount Winker Stay B Type“

〇A high-quality stainless stay to mount a 10mm blinker on the side of the stem.

【Speedometer】

『Mechanical Speedometer 60mm Black Panel 1:4』

【Speedometer】

『Extension meter cable joint』

〇Used when extending the fork or relocating the meter.

CenterTank, oil tank, seat, step, muffler etc.

● The body and exterior are finished with the bare minimum bolt-on parts.

We used a black-painted original gasoline tank, a classic semi-up muffler, and a comfortable seat with an old-school design.

With the weight distributed in a mid-high position, you’ll have an outstanding comfort and cool riding posture that won’t tire you out even on long runs.

【Step】

“Mid-High Control Parkerized for SR400/500“

〇This step kit is essential for 2%ER’s custom, which makes the riding posture cool and the position extremely less tiring.

【Muffler】

“Semi-Up Drag Pipe Muffler”

〇An up-muffler that is slip-on mounted on a normal exhaust pipe.

【Seat】

“Old School Double Seat II”

〇You can select a seat from 7 types.

【Electrical Equipment】

“Brat Style Electrical Plate“

〇A simple electrical plate that makes it easy to organize harnesses and electrical components.

“Battery Lesser“

〇A battery-less kit that is manufactured entirely in Japan.

【Engine Area】

“Breather filter SR400/500“

〇This is a filter kit needed when removing the original air cleaner.

【Drive System】

『Front sprocket SR400/500 428-19』

〇A durable replacement sprocket made of steel.

    • RearFenders, rear shocks, swingarms, etc.

    ●The rear area is lowered with a 280mm suspension and fitted with the classic watermelon pattern tires.

    We’ve added a sissy bar to the rear fender of a decent length, which can carry a lot of luggage.

    【Rear Shock】

    “280mm G-Suspension/Chrome”

    〇A rear shock that lowers by about 4cm. It moves well among low-down suspensions. (Removal of the original chain case is necessary)

    【Rear Fender】

    『2%er Rear STD Short Fender [SR400/500]』

    〇A short fender with ribs around the perimeter like the original, which suits all designs without fail.

    【Sissy Bar】

    “DIAMOND Round Sissy Bar Kit”

    〇A set of old-school design round plate and diamond sissy bar.

    【Rear Tire】

    “LOADSTAR TIRE 4.50-18“

    〇A classic vintage style with a watermelon pattern. It’s a rear tire with height and volume.

    【Turn Signal】

    『Small Bullet Turn Signal Chrome 4pcs SET General Purpose』

    〇A classic among classics. A chopper-style turn signal.

    【Tail Lamp】

    “Sparto Tail Lamp/Polish Japanese Number Standard”

    〇The standard Sparto. Domestic numbers can be installed without any modifications.

    “Number Plate Reinforcement Aluminum Back Plate”

    〇A 2mm thick aluminum plate for preventing number plate cracks and reinforcing already cracking numbers.

    ※Parts Reference may show similar products or products with additional processing.