Home » #317 SR400

#317 SR400

2024.8.20

Custom Bike

#317 SR400Custom Report

The front fork extended by 27.5cm with a long inner tube and joint, and the 280mm rear shock,

The silhouette finished with classic original parts such as pullback handlebars and sissy bars,

Equipped with the newly handled “Long Swing Arm SR400/500“,

While maintaining a more chopper-like silhouette, the benefit of a 3.5cm lowdown makes it easy for a 162cm tall owner to touch both feet firmly on the ground.

Also, the installation of the new handlebar, which can be relocated 4cm forward and about 5cm upward, and the “Genuine Handle Post Setback Kit“,

It is finished in a position where you can ride comfortably without getting tired even over long distances with the mid-high step.

With the change of the swing arm, the installation position has changed, and all except the rear fender that has not yet been kitted are made with original bolt-on parts.

● A full-fledged silhouette that can be completed without processing

● Low budget and short working time (delivery time) due to bolt-on parts

● Position that is not easily tired

● Fun of running with FCR carburetor

● Ease of passing vehicle inspection

We have made it with attention to the above.

■Vehicle inspection

.Muffler replacement

.Add left mirror

.Add reflector

.Tandem belt/step (when registering for two people)

You can clear the vehicle inspection with the above.

Custom List

FrontHandlebars, F forks, headlights, etc.

●By selecting the right tires, we have adjusted the handling, which tends to become heavy due to fork extension and rear lowering, to make it easy and enjoyable to ride even in the city. We use standard headlights and turn signals, and they are installed in a position where they can be cleared as they are during vehicle inspection, without any position changes.

【Front Fork】

“75mm Fork Joint”¥16,800

〇A high-quality stainless steel joint made in Japan.

“20cm Long Inner Tube”¥62,000

〇A fork tube kit that allows you to extend the front more safely.

“Fork boots, general-purpose” ¥2,800

〇Classic universal fork boots.

“2%er Tweak Bar (front stabilizer) [SR 400/500]” ¥17,500

〇A stabilizer that is extremely effective in correcting the handling that tends to lag behind with extended forks.

“Welding Side Stand Extension Plate”¥3,200

〇A plate for extending the side stand that leans too much when the fork is extended. Welding is required.

【Handle/Handle Area】

“Narrow Pullback Handle”¥12,000

〇A pullback handle that is 10cm narrower than the popular semi-narrow pullback.

“Genuine Handle Post Setback Kit”¥14,000

〇A kit that changes the position of the genuine handle post to a more comfortable and easy-to-ride position by setting it back 4cm forward and 5.3cm upward.

“Amal type throttle holder, general purpose (for 7/8″)“¥4,180

“Barrel Grip”¥1,500

“1000mm Throttle Cable”¥2,750

“Brake Hose 1200mm 0°-35°”¥6,000

◯The handle area is a standard 2%ER clean treatment with a small throttle and simple grip.

“Chrome Cross Mirror”¥5,400

〇A clamp mirror with an iron cross design, reminiscent of a chopper-like design.

【Front Fender】

“2%er Short Front Fender STD [SR400/500]” ¥12,500

〇A short fender that suits any style. Despite being made of FRP, it has a design with ribs around the perimeter like the original

[Neat Handlebar Arrangement]

“MOTOR ROCK Decompression lever” ¥4,500

〇A decompression lever directly attached to the engine to simplify the handlebar area.

【Switch】

“Mini Turn Signal Switch Coupler On Kit (’85~00)” ¥3,950

〇A mini turn signal switch that is easy to install with a coupler on.

(Different model years, installed with modifications on small headlights)

“Handle Lock Weld On Kit” ¥4,200

〇It is newly installed by welding to the lower part of the stem, making it less noticeable and easy to operate.

【Speedometer】

『Mechanical Speedometer 60mm Black Panel 1:4』¥8,400

〇A standard small meter. It comes with a trip meter.

【Front Tire】

“SHINKO flute 3.00-18”¥12,800

〇A street tire with a vertical groove design. It helps to lighten the handling that tends to become heavy when long forks are used. It is a small diameter size with a round 3.00 size.

【Headlight】

“5.75 inch Bates Light HS Type Black Body/Chrome Rim Universal”¥10,500

〇This is a Bates light for custom vehicles with a harness storage type that can store many harnesses and couplers inside the light.

“Bottom Mount Light Stay II” ¥2,400

〇A headlight stay that suits the chopper style well with its moderate height and protrusion. (5.75 inch Bates Light Set II SR400/SR500)

【Front Blinker】

“Small Bullet Blinker/Chrome”¥7,000

〇A standard small bullet blinker, black. It is a 10mm mount.

“Stem Mount Blinker Stay B Type”¥2,600

〇A small quality stainless stay to mount a 10mm blinker on the side of the stem

CenterTank, oil tank, seat, step, muffler etc.

●The body and exterior are finished with the bare minimum bolt-on parts.

The original gasoline tank painted in black, the classic drag pipe muffler, a comfortable seat with a slim design, and the FCR carburetor that dramatically changes the ride are adopted.

The operation is a jockey shift. It’s a step kit that doubles the fun of controlling the bike, with a mid-high position that can distribute body weight, making clutch operation easier and reducing fatigue even over long distances.

【Muffler】

“Torque cone drag pipe muffler SR400/500” ¥36,000

〇This is a full exhaust muffler with a torque cone developed in-house in the mouthpiece.

【Step】

“Drilled Mid-High Jockey Shift Kit for Percalize SR400/500” ¥79,500

〇This step kit is indispensable for 2%ER’s custom, which makes the riding posture cool and the position extremely less tiring.

【Seat】

“Slim Double Sheet Bates Type Tuck Roll for SR400/500” ¥38,000

〇You chose a slim and simple tuck roll seat from seven options.

【Carburetor】

“FCR carburetor 39φ SR400/500 single unit” ¥77,000

〇Your slow SR will be dramatically transformed. This is a user-friendly carburetor that provides sharp and smooth acceleration.

“Funnel Net for FCR Carburetor” ¥3,900

〇This is a set of stainless steel trash prevention nets that fit between the body and the funnel.

“Manifold Kit for FCR39φ” ¥12,000

〇This is a dedicated adapter to firmly fix the FCR carburetor to the SR400/500.

【Electrical Equipment】

“2%ER New Electrical Equipment Plate” (Coming Soon) Price Undecided

“IC blinker relay wide range specification” ¥2,400

〇A wide-range turn signal relay that can handle 1-150 watts without any problem, even for LED turn signals. It can also be used as a replacement for the original relay.

“Battery Lesser” ¥3,400